<h2><strong>Maintenance schedule</strong></h2>
<p>The recommended maintenance schedule is as follows:</p>
<img src="https://cdn.livechat-static.com/api/file/kb/file/15335775/f36e396f82-ccd7de3c2ba7ec6b7d16.png" alt="undefined" style="float:none;height: undefined;width: undefined"/>
<p></p>
<h2><strong>Cleaning water nozzles</strong></h2>
<ol>
<li>Prepare water nozzle brush</li>
<li>Clean inside water nozzles using a brush to avoid water flow getting blocked.</li>
</ol>
<img src="https://cdn.livechat-static.com/api/file/kb/file/15335775/6b82afebda-6ba707eac1ae7f2e09e6.png" alt="undefined" style="float:none;height: undefined;width: undefined"/>
<p>After cleaning, please "Get Tool" D1.0 on both spindles and check the water flow angle as shown below:</p>
<img src="https://cdn.livechat-static.com/api/file/kb/file/15335775/8fc50c018f-9040b52cf9f0b6132b81.png" alt="undefined" style="float:none;height: undefined;width: undefined"/>
<p></p>
<h2><strong>Cleaning spindle collet</strong></h2>
<p>Prepare spindle maintenance kit:</p>
<img src="https://cdn.livechat-static.com/api/file/kb/file/15335775/eaf8f3c7fb-c6b74842ed96f2f22b2c.png" alt="undefined" style="float:none;height: undefined;width: undefined"/>
<p></p>
<iframe allowfullscreen width="undefined" height="undefined" src="https://www.youtube.com/embed/3dx3uqzDywM" frameBorder="0"></iframe>
<p></p>
<p></p>


Maintenance schedule
The recommended maintenance schedule is as follows:
 

Cleaning water nozzles
Prepare water nozzle brush
Clean inside water nozzles using a brush to avoid water flow getting blocked.
 
After cleaning, please "Get Tool" D1.0 on both spindles and check the water flow angle as shown below:
 

Cleaning spindle collet
Prepare spindle maintenance kit:
 

 

 


Maintenance

General information

Scope of Delivery: Chairman

Installation Part 1: Machine setup

Installation Part 2- Connecting the machine to the PC

Installation Part 3: Calibration

Installation Part 4 - Go2Dental Software

Operation

System settings

Chairman