<h2><strong>Error </strong>causes</h2>
<p>The difference between the current and previous measured lengths is bigger than expected. The tool might be released from the collet slightly.</p>
<h2></h2>
<h3><strong>How to fix the issue:</strong></h3>
<ol>
<li>Check the state of the clamped tool and inspect the collet.</li>
<li>If a tool is slightly released from the collet, please clean the collet using a spindle maintenance kit.</li>
<li>If you can’t still solve the problem, please contact our support team.</li>
</ol>
<p></p>


Error causes
The difference between the current and previous measured lengths is bigger than expected. The tool might be released from the collet slightly.

How to fix the issue:
Check the state of the clamped tool and inspect the collet.
If a tool is slightly released from the collet, please clean the collet using a spindle maintenance kit.
If you can’t still solve the problem, please contact our support team.


Error code: ERR_TOOL_LONG [18]

Starting GO2Support for remote technical support

Error code: ERR_WATER_PUMP_TIMEOUT [4]

Error code: ERR_GET_TOOL_FAILED [10]